Octoplus JTAG PRO Software Updates New

namnhatrang

Moderator
Thành viên BQT
#21
Octoplus JTAG PRO v.1.2.6 is out!

You do not have permission to view link Đăng nhập hoặc Đăng ký.


Octoplus JTAG PRO Software v.1.2.6 is out!

We released support for "Qualcomm MSM8x26" cores, added eMMC write verification, added support via USB for LG H962, K420N, D290N and support for Samsung SM-J700H, LG D290N, Huawei G526-L11 via eMMC.

Octoplus Box JTAG PRO Software v.1.2.6 Release Notes:
Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported. Added support for the following models via USB:

  • LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
  • LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
  • LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
  • LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
Added support for the following models via eMMC:

  • LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
  • Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
  • Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
All pinouts and Repair procedures described in the manual ("Help" button in the software).
* This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software.





You do not have permission to view link Đăng nhập hoặc Đăng ký.
 

namnhatrang

Moderator
Thành viên BQT
#22
Octoplus JTAG PRO v.1.2.7 is out!

You do not have permission to view link Đăng nhập hoặc Đăng ký.


Octoplus JTAG PRO Software v.1.2.7 is out!

Uploaded “Live logs” for most supported devices in to the Support Area.
Added support via USB for Lenovo S856, Huawei G6-L11, Huawei G620-A2 and
support for Samsung SM-J500H, LG H788, LG H343 via eMMC.


Octoplus Box JTAG PRO Software v.1.2.7 Release Notes:
Added support for the following models via USB:

  • Lenovo S856 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Huawei G6-L11 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Huawei G620-A2 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added support for the following models via eMMC:

  • Samsung SM-J500H - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG H788 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG H343 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Uploaded “Live logs” (software logs with the information about correct device data connection) for most supported devices in to the Support Area. “Live logs” will be useful for checking correctness of your device connection - just compare log of connection operation of your device with “Live log” from the Support Area.

Added more detailed operations’ logging

All pinouts and Repair procedures described in the manual ("Help" button in the software)



You do not have permission to view link Đăng nhập hoặc Đăng ký.
 

namnhatrang

Moderator
Thành viên BQT
#23
Octoplus JTAG PRO Software v.1.2.8 is out!

You do not have permission to view link Đăng nhập hoặc Đăng ký.


Octoplus JTAG PRO Software v.1.2.8 is out!

Added support via USB for LG D390N, LG H525N, LG VS986W and
support for Samsung SM-T310, LG D390N, LG H410 and LG P895 via eMMC.
Uploaded new “Live logs” into the Support Area.


Octoplus Box JTAG PRO Software v.1.2.8 Release Notes:
Added support for the following models via USB:

  • LG D390N - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG H525N - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG VS986W - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added support for the following models via eMMC:

  • Samsung SM-T310 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG D390N - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG H410 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG P895 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
New features and improvements in «Content Extractor»:

  • Added view of deleted data in contacts and SMS DBs ("Show unallocated data" button)
  • Improved media files recognition in supported FS
Uploaded new “Live logs” into the Support Area All pinouts and repair procedures described in the manual ("Help" button in the software)



You do not have permission to view link Đăng nhập hoặc Đăng ký.
 

namnhatrang

Moderator
Thành viên BQT
#24
Octoplus JTAG PRO Software v.1.2.9 is out!

You do not have permission to view link Đăng nhập hoặc Đăng ký.



Dear friends!


We wish you and your family a sweet and beautiful New Year! Let this time bring happiness, love, and prosperity to your home and life.
May every day of the new year bring pleasant events, satisfaction from your achiements, new horizons, and happiness!
Thank you for every day out of 365 days we’ve spent together. Be sure we will further please you with new regular updates!

Please note, that we will be on holidays from December 29th till January 3rd. All support issues will be postponed during this period. See you next year!

Octoplus Box Team
Octoplus JTAG PRO Software v.1.2.9 is out!

Released new Samsung eMMC features: «Smart Report», «Factory Format», «Write CSD», «Write/Update firmware»).
Released writing firmware via USB for devices, based on Qualcomm CPUs (Qualcomm raw images with «rawprogram0.xml», «patch0.xml»).


Octoplus Box JTAG PRO Software v.1.2.9 Release Notes:

Added new features for Samsung eMMC chips:

  • Samsung Smart Report
    This feature shows extended info (check state) of Samsung eMMC chip such as:
    number of eMMC banks, initialization bad block count, optimal trim size and other information.

  • Samsung eMMC Factory Format
    This feature is intended to format Samsung eMMC chips.
    Note, that after performing Factory Format operation all eMMC data will be erased!

  • Samsung eMMC Write CSD
    This feature allows you to write data to CSD register in Samsung eMMC chips.

  • Samsung eMMC Write/Update firmware
    This feature allows you to update/write eMMC firmware on Samsung eMMC chip.
    If eMMC is not connected in Normal (General) Mode, to write eMMC firmware you should force it into Boot Mode using TestPoint.
    With this update we have added support and firmware for the following Samsung eMMC chips:
    - KMVTU000LM-B503 [VTU00M]
    - KMN5U000ZM-B203 [N5U00M]
    - KMKJS000VM-B309 [KJS00M]
    - KMK5U000VM-B309 [K5U00M]
    - KMJJS000WM-B409 [JJS00M]
    - KLMCG8GE4A-A001 [MCG8GA]
    - KLM8G1WE4A-A001 [M8G1WA]
    List of supported Samsung chips will expand in future software updates.

    To write/update firmware in mentioned above eMMC chips, do the following:
    1. Select «eMMC» interface option
    2. Select «Brand: eMMC_chips»
    3. Select eMMC chip part number in «Model:» software list
    4. Press «Help» button to view eMMC pinout and TestPoint picture. Acknowledge the manual.
    5. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000)
    6. Press «Connect» button to connect eMMC (if necessary, connect TP to GND)
    7. When connection is successful, release (disconnect) TP wire from GND and go to «eMMC service» tab in the software
    8. Press «Write/Update firmware» button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button


    NOTE: PLEASE DON’T SELECT INCORRECT eMMC (WITH NON MATCHING PART NUMBER)! WRITING INCORRECT FIRMWARE WILL DAMAGE YOUR EMMC!
Box firmware has been updated! To update firmware automatically, it is necessary to connect the Box and only then run the software.
Also, you can update Box firmware manually via «Update Box Firmware» button at «Welcome» tab in Octoplus JTAG PRO software.
Note, it won't be possible to use mentioned above Samsung eMMC features without updating Box firmware!
Released writing factory firmware via USB for devices, based on Qualcomm CPUs.
This feature («Repair devices based on Qualcomm CPU’s using XML files (*.xml)») allows you to Repair/Write factory firmware on devices,
based on Qualcomm CPUs using firmware with «rawprogram0.xml» and «patch0.xml».
To make Repair/Write firmware, do the following:

  1. Connect the device to PC in «Qualcomm…9008…» Mode. If necessary, use TP
  2. Select «USB» interface option
  3. Select «Brand: Custom Setting»
  4. Select proper «Device (Core)»
  5. Select proper Qualcomm loader in «Loader» list
  6. Press «Connect» button and wait while device will be connected
  7. Go to «Factory repair» tab
  8. Press «Repair devices based on Qualcomm CPU’s using XML files (*.xml)» button
  9. Select «rawprogram0.xml» and «patch0.xml» files
  10. Press «Write» button to write selected firmware
Note:
some firmware’s XML may contain «modemst1» and «modemst2» partitions for writing.
Writing of these partitions may lead to loosing phone’s IMEI and calibration data.
Software will automatically deselect and skip writing of these partitions. If you need to write these partitions, you should manually select (check) them and confirm writing.
Also, software will automatically make backup (read) these partitions form the phone to «Backup» folder before writing firmware.
Added possibility to make Repair or Write flash without write data verification («Write data verification» option).
To make Smart Repair/Factory Repair/Write flash without write data verification, do the following:
connect the device, deselect (uncheck) «Write data verification» option in the software and perform Smart Repair/Factory Repair/Write flash operation.
Made some GUI changes. All pinouts and repair procedures described in the manual ("Help" button in the software)Also, we have improved routines of Sony phones connection, based on Qualcomm MSM7225A via Octoplus JTAG PRO Box
and we have uploaded «Octoplus JTAG Installer 1.9.5.1» into the Support Area and Octoplus Box site.





You do not have permission to view link Đăng nhập hoặc Đăng ký.
 

namnhatrang

Moderator
Thành viên BQT
#25
Octoplus JTAG PRO v.1.3.1 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO Software v.1.3.1 is out!

Added support via eMMC for Samsung SM-G532F, Samsung SM-C105, Samsung GT-P5210, Samsung SCH-R960, LG VS986W and LG F160LV.
Added GP Area Partitioning features.
Uploaded new “Live Logs” in to the Support Area.

Octoplus JTAG PRO Software v.1.3.1 Release Notes:
You do not have permission to view link Đăng nhập hoặc Đăng ký.
Added support for the following models via eMMC
:

  • Samsung SM-G532F - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
  • Samsung SM-C105 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
  • Samsung GT-P5210 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
  • Samsung SCH-R960 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
  • LG VS986W - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
  • LG F160LV - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
You do not have permission to view link Đăng nhập hoặc Đăng ký.
Added GP (General Purpose) Area Partitioning features
:

  • Read data from GPx partitions.
  • Write data to GPx partitions.
  • Create GP partitions (for devices, which supports GP Area Partitioning).
You do not have permission to view link Đăng nhập hoặc Đăng ký.
Uploaded new “Live logs” in to the Support Area.

You do not have permission to view link Đăng nhập hoặc Đăng ký.
All pinouts and Repair procedures described in the manual ("Help" button in the software)

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Find out more at:
You do not have permission to view link Đăng nhập hoặc Đăng ký.
 

namnhatrang

Moderator
Thành viên BQT
#26
Octoplus JTAG PRO Software v.1.3.2 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.

Octoplus JTAG PRO Software v.1.3.2 is out!

Added support via USB for LG D160, LG D320n, LG K373
and support via eMMC for Samsung SM-G900A, Samsung SM-J120AZ, Samsung SM-C101, Huawei Y530-U00, LG K600, LG SU870.

Uploaded new “Live logs” in to the Support Area.

Octoplus JTAG PRO Software v.1.3.2 Release Notes:


Added support for the following models via USB:

  • LG D160 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG D320n - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG K373 - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added support for the following models via eMMC:

  • Samsung SM-G900A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J120AZ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-C101 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Huawei Y530-U00 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG K600 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG SU870 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Released support for "Qualcomm MSM8909" and "Qualcomm MSM8976" cores (general QC USB loaders added). Read/Write/Full Erase operations are supported

Updated help and pinouts in SRF for Samsung GT-N5100, please re-download SRF file. (thanks to Mr. mirazg)

Added possibility to select units of measurements (MB, KB, Hex values, Hex blocks) for setting start address and length for reading/writing custom or full flash

Uploaded new “Live logs” in to the Support Area

All pinouts and Repair procedures described in the manual ("Help" button in the software)



You do not have permission to view link Đăng nhập hoặc Đăng ký.
Find out more at:
You do not have permission to view link Đăng nhập hoặc Đăng ký.
 

namnhatrang

Moderator
Thành viên BQT
#27
Octoplus JTAG PRO Software v.1.3.3 - small HTC appetizer

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO Software v.1.3.3 is out!

Added support for HTC One M8, One M8S, One M7, Desire 820N, Desire 816, Desire 516, Desire 500!

Uploaded new “Live logs” into the Support Area.

Octoplus JTAG PRO Software v.1.3.3 Release Notes:
Added support for the following models via eMMC:

  • HTC One M8 (OP6B700) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC One M8S (0PKV100) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC One M7 (PN07100) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC Desire 820N – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC Desire 816 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC Desire 500 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Uploaded SRF for HTC Desire 516 into the Support Area («USER UPLOADED SRF» folder) (thanks to Mr. Dr_Wolodya)
Updated help and pinouts in SRF for LG D618, please re-download SRF file (thanks to Mr. sd2)
Uploaded new “Live logs” into the Support Area
Added more detailed operation's logging
Improved Smart Card communication routines
All pinouts and Repair procedures described in the manual ("Help" button in the software)
You do not have permission to view link Đăng nhập hoặc Đăng ký.
 

namnhatrang

Moderator
Thành viên BQT
#28
Octoplus JTAG PRO Software v.1.3.4 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO Software v.1.3.4 is out!

Added Factory Repair (Boot) for Sony devices.

Added support for Samsung SM-A500FU, Samsung SM-J700F, Huawei G630-U10, Sony D2303, Sony D5503, Sony D6603 via eMMC and support for OPPO A31 via USB.

Added possibility to set extended options for boot operation mode.

Uploaded new “Live logs” in to the Support Area.

Octoplus JTAG PRO Software v.1.3.4 Release Notes:


  • Sony Factory Repair feature has been released!
You can try to repair boot on Sony devices via eMMC by using original Sony firmware («*.ftf» and "*.SIN_FILE_SET" versions of firmware are supported)
This feature can be useful in case, if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported.
Note, device should have non-damaged native TA (Trim Area), otherwise device will not be repaired. We recommended to make backup of TA before repairing.
Also, software will automatically try to detect and backup (read) TA partition from the phone to «Backup» folder before repairing.
  • Added support for the following models via eMMC:

  • Samsung SM-A500FU – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J700F – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Huawei G630-U10 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Sony D2303 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
  • Sony D5503 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
  • Sony D6603 – added Read/Write/Erase, Easy Repair *, Partition Manager, Constructor for Repair Files
  • Added support for the following models via USB:

  • OPPO A31 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Added possibility to set extended options for boot operation mode.
    From now on you can set the following options: «Boot partition enable», «Boot ACK», «Boot bus width», «Reset boot bus conditions» and «Boot mode»

  • Box firmware has been updated to 1.16 version! In 1.16 firmware version we have improved eMMC connection and eMMC Read operations
To update firmware automatically, it is necessary to connect the Box and only then run the software.
Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG Pro software
  • Octoplus card firmware has been updated to 2.5 version! To run Octoplus JTAG Pro Software v.1.3.4 and future versions, it is necessary to update card firmware.
    Also note, that after updating card firmware to v.2.5, it won’t be possible to run older Software versions

  • Uploaded Full flash for Huawei G620S-L01 into the Support Area

  • Uploaded new “Live logs” into the Support Area

  • Added more detailed operations’ logging

  • Improved work (parsing) with pit files

  • All pinouts and Repair procedures described in the manual ("Help" button in the software)

* Note: device should have non-damaged native TA; otherwise device will not be repaired





Octoplus/Octopus Shell Software v1.1.9 is out!


Octoplus/Octopus Shell Software v1.1.9 Release Notes:


  1. Added smart-card latest firmware compatibility
  2. Minor fixes

You do not have permission to view link Đăng nhập hoặc Đăng ký.
You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#29
Octoplus JTAG PRO v.1.3.5 - Asus devices repair added!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO Software v.1.3.5 is out!

Added support for Asus Nexus 7 (ME571K), Asus ZenFone 5 (T00F), Asus ZenFone 5 (T00P KL), Asus Memo Pad 7 (K01A), Asus FonePad (K012),
Nokia XL Dual Sim (RM-1030), Nokia Lumia 635 (RM-975), Samsung Galaxy Win Pro SM-G3812, Samsung Galaxy E5 SM-E500H via eMMC and support for LG US991 and Asus ZenFone 2 (Z00LD) via USB.


Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported.

Uploaded new “Live logs” in to the Support Area..

Octoplus JTAG PRO Software v.1.3.5 Release Notes:
Added support for the following models via eMMC:

  • Asus Nexus 7 (ME571K) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Asus ZenFone 5 (T00F) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Asus ZenFone 5 (T00P KL) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Asus Memo Pad 7 (K01A) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Asus FonePad (K012) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Nokia XL Dual Sim (RM-1030) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Nokia Lumia 635 (RM-975) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G3812 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. khurram136)
  • Samsung SM-E500H – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added support for the following models via USB:

  • LG US991 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Asus ZenFone 2 (Z00LD) – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Released support for "Qualcomm MSM8939" core (general QC USB loader added). Read/Write/Full Erase operations are supported
Uploaded new “Live logs” in to the Support Area
Made improvements in Help and Pinout viewer
All pinouts and Repair procedures described in the manual ("Help" button in the software)
You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#30
Octoplus JTAG PRO v.1.3.6 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO Software v.1.3.6 is out!

Added support via eMMC (ISP) for HTC Desire Eye M910n, HTC One DS (PN07710), HTC Desire 626 (OPM9120), HTC Desire 510 (OPCV200), Samsung SM-J500FN, Samsung GT-I9505, LG LS665 and HUAWEI Ascend Mate 7 (MT7-L09).

Uploaded new “Live logs” in to the Support Area.

Octoplus JTAG PRO Software v.1.3.6 Release Notes:
Added support for the following models via eMMC:

  • HTC Desire Eye (M910n) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC One DS (PN07710) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC Desire 626 (OPM9120) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC Desire 510 (OPCV200) – added Read/Write/Erase, Easy Repair*, Partition Manager, Constructor for Repair Files
  • Samsung SM-J500FN – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung GT-I9505 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG LS665 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HUAWEI Ascend Mate 7 (MT7-L09) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Improved create GP partitions procedure
Added last selected folder setting save in Open Firmware dialog window
Uploaded new “Live logs” in to the Support Area
All pinouts and Repair procedures described in the manual ("Help" button in the software)
You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#31
Octoplus JTAG PRO v.1.3.8 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO Software v.1.3.8 is out!

Added support via eMMC (ISP) for HTC One A9u, HTC One M7 (PN07110), Samsung SM-J120H, Samsung GT-I9500, LG H818P and LG D410hn.

Added Qualcomm USB loaders for MSM7x30, MSM8926, MSM8930, MSM8x25, MSM8x25A, MSM8x25Q.

Uploaded new “Live logs” in to the Support Area.

Some fixes and improvements.

Octoplus JTAG PRO Software v.1.3.8 Release Notes:
Added support for the following models via eMMC:

  • HTC One A9u – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC One M7 (PN07110) – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J120H – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung GT-I9500 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG H818P – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG D410hn – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added Qualcomm USB loaders for MSM7x30, MSM8926, MSM8930, MSM8x25, MSM8x25A, MSM8x25Q. Read/Write operations are supported (thanks to Mr. rebainoor)
Added reading of Android build info from the device, while connecting it via eMMC
Fixed issue with writing CID operation in some cases
Improved procedure of changing default firmware folder
Updated help and pinouts in Smart Repair File (SRF) for Samsung GT-I9001 (please re-download SRF) (thanks to Mr. Dr_Wolodya)
Box firmware has been updated to 1.18 version! In 1.18 firmware version we have improved eMMC connection and write CID operation.
To update firmware automatically, it is necessary to connect the Box and only then run the software.Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG PRO software.
Uploaded new “Live logs” in to the Support Area
All pinouts and Repair procedures described in the manual ("Help" button in the software)
You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#32
Octoplus JTAG PRO Software v.1.3.9 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.

Octoplus JTAG PRO Software v.1.3.9 is out!

Added support via eMMC (ISP) for Samsung SM-G316HU, Samsung SM-J320F, LG AS330, LG M400DY and support via USB for LG H961N, LG AS330 and LG M160!

Added «eMMC Write/Update firmware» for the numerous of Samsung eMMC chips.

Box firmware has been updated.

Uploaded new “Live logs” in to the Support Area.

Some fixes and improvements.

Octoplus JTAG PRO Software v.1.3.9 Release Notes:

Added support for the following models via eMMC:

  • Samsung SM-G316HU – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J320F – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG AS330 – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG M400DY – added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added support for the following models via USB:

  • LG H961N – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG AS330 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG M160 – added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Uploaded SRF for LG K430 into the Support Area («USER UPLOADED SRF» folder) (thanks to Mr. agrsat)

Added «eMMC Write/Update firmware» for the following Samsung eMMC chips:

  • KLM4G1FE3B-B001 (M4G1FB)
  • KMS5U000KM-B308 (SSU00M)
  • KMSJS000KM-B308 (SJS00M)
  • KMVUS000LA-B304 (VUS00A)
  • KLM8G2FE3B-B001 (M8G2FB)
  • KMJJS000WA-B409 (JJS00A)
  • KMKUS000VM-B410 (KUS00M)
  • KMNJS000ZM-B205 (KJS00M)
  • KMK7U000VM-B309 (K7U00M)
  • KMN5X000ZM-B209 (N5XZMB)
  • KLM8G1WEMB-B031 (8WMB3R)
  • KMK7X000VM-B314 (K7XVMB)
  • KMK5X000VM-B314 (K5XVMB)
We have tested and added Test Point (TP) pictures to force eMMC into Boot Mode for each of mentioned above eMMC chips.

To write/update eMMC firmware, please complete the following steps:

  1. Select «eMMC» interface option
  2. Select «Brand: eMMC_chips»
  3. Select eMMC chip part number in «Model:» software list
  4. Press «Help» button to view eMMC pinout and TP picture. Acknowledge the manual
  5. Solder all necessary wires to connect eMMC (if necessary, solder TP wire to force eMMC into Boot Mode, Product name will be displayed as 000000)
  6. Press «Connect» button to connect eMMC (if necessary, connect TP to GND)
  7. When connection is successful, release (disconnect) TP wire from GND and go to «eMMC service» tab in the software
  8. Press «Write/Update firmware» button, select proper eMMC chip from the list and press "Write/Update eMMC firmware" button
Note: Please don’t select incorrect eMMC (with non-matching part number)! writing incorrect firmware will damage your eMMC!

  • Added auto-analyzing of TA (Trim Area) zone in Sony devices (structure, IMEI, lock status).
    From now on software automatically checks TA zone and inform you, whether TA is correct or it is damaged.
    You should remember, for successful repair of most Sony devices, their TA should be original and non-damaged.

  • Box firmware has been updated to 1.19 version! In 1.19 firmware version we have improved eMMC detection procedure.
    To update firmware automatically, it is necessary to connect the Box and only then run the software.
    Also, you can update Box firmware manually via «Update Box Firmware» button at the «Welcome» tab in Octoplus JTAG PRO software.

  • Uploaded new “Live logs” in to the Support Area

  • Some changes in log information

  • All pinouts and Repair procedures described in the manual ("Help" button in the software)




You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#33
Octoplus JTAG PRO v.1.4.2 software is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO v.1.4.2 is out! New models and USB loaders were added!

Added support via eMMC for Asus Zenfone 6 (T00G), Huawei ALE-L21, Samsung SM-G386F, Samsung SM-J106F, Samsung SM-J120F, Samsung SM-J321AZ, Samsung GT-I9190, Samsung GT-I9192 and support via USB for Alcatel OneTouch POP 3 5065D, Alcatel OneTouch Idol 3 6039Y, Alcatel OneTouch Idol 3 6045I, Asus ZenFone Selfie (Z00UDB), Vivo Y51L, ZTE Z9 (NX508J)!

Added general Qualcomm USB loaders for MSM8909, MSM8917, MSM8926, MSM8928, MSM8936, MSM8916, MSM8976, MSM8994, MSM8996.

Uploaded new “Live logs” into the Support Area.

Some adjustments and improvements were made.

Octoplus JTAG PRO Software v.1.4.2 Release Notes:
Added support for the following models via eMMC:

  • Asus Zenfone 6 (T00G) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Huawei ALE-L21 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G386F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J106F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J120F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J321AZ – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung GT-I9190 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung GT-I9192 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added support for the following models via USB:

  • Alcatel OneTouch POP 3 5065D – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Alcatel OneTouch Idol 3 6039Y – Write, Easy Repair, Partition Manager, Constructor for Repair Files
  • Alcatel OneTouch Idol 3 6045I – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Asus ZenFone Selfie (Z00UDB) – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Vivo Y51L – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • ZTE Z9 (NX508J) – Write, Easy Repair, Partition Manager, Constructor for Repair Files
Added 15+ general Qualcomm USB loaders for MSM8909, MSM8917, MSM8926, MSM8928, MSM8936, MSM8916, MSM8976, MSM8994, MSM8996. Read/Write/Full Erase operations are supported.
Improved communication in ADB connection Mode
Uploaded SRF for HTC D820U (OPFJ100) into the Support Area (“USER UPLOADED SRF” folder) (thanks to Mr. rohit.sharma73)
Uploaded new “Live logs” into the Support Area
Some changes were made in log information
All pinouts and Repair procedures described in the manual ("Help" button in the software)
You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#34
Octoplus JTAG PRO v.1.4.3 - added Motorola Factory Repair and more!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO v.1.4.3 is out!

Added Factory Repair (Boot) for Motorola devices, based on Qualcomm CPUs.

Added support for Motorola XT1021, Motorola XT1030, Motorola XT1032, Motorola XT1034, Motorola XT1541, Motorola XT1064, Motorola XT1097 and Microsoft Lumia 535 (RM-1090) via eMMC.

Added new general Qualcomm USB loaders for MSM8909, MSM8936, MSM8974, MSM8994, MSM8996.

Uploaded new “Live logs” into the Support Area.

Octoplus JTAG PRO Software v.1.4.3 Release Notes:

Motorola Factory Repair feature has been released.

You can try to repair boot on Motorola devices, based on Qualcomm CPUs, via eMMC by using original Motorola firmwares (firmwares with “*.xml”).
This feature can be useful if you don’t have the same working device to prepare Boot Repair file or device you want to repair currently is not supported. Note, device should have non-damaged CID partition, otherwise it could cause problems with writing firmware after repairing. We recommended making backup of CID partition before repairing. Also, software will automatically try to detect and backup (read) CID partition from the phone to “Backup” folder after connecting.

Added support for the following models via eMMC:

  • Motorola XT1021 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Motorola XT1030 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Motorola XT1032 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Motorola XT1034 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Motorola XT1541 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Motorola XT1064 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Motorola XT1097 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Microsoft Lumia 535 (RM-1090) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Box firmware has been updated to 1.21 version! In this firmware version we have improved eMMC Read/Write operations.
To update firmware automatically, it is necessary to connect the Box and only then run the software.
Also, you can update Box firmware manually via “Update Box Firmware” button at the “Welcome” tab in Octoplus JTAG PRO software.

Released Pause/Resume operations in Download Manager (“Download *.srf” button in the Software)

Uploaded new “Live logs” into the Support Area

All pinouts and Repair procedures are described in the manual ("Help" button in the Software)

You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#35
Octoplus JTAG PRO v.1.4.4 - many new phones and features!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO v.1.4.4 is out!

Added support for Huawei G6-U10, Lenovo ZUK Z1, Xiaomi Redmi 4A via USB; support for Sony C6603, Sony C6903, Sony D2203, Sony E2312, Samsung SM-G532G, LG P765 via eMMC and support for Nokia Lumia 1020 (RM-875) via JTAG.

Improved Factory Repair (Boot) operation for Motorola devices, based on Qualcomm CPUs.

We made improvements in Download Manager ("Download *.srf" button in Software) - from now on you can download files in separate window, so you can work with devices while selected files are being downloaded.

Uploaded new “Live logs” into the Support Area.

Octoplus JTAG PRO Software v.1.4.4 Release Notes:


  • Added support for the following models via USB:

  • Huawei G6-U10 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Lenovo ZUK Z1 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Xiaomi Redmi – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Added support for the following models via eMMC:

  • Sony C6603 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Sony C6903 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Sony D2203 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Sony E2312 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G532G – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG P765 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Added support for the Nokia Lumia 1020 via JTAG:

  • Nokia Lumia 1020 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Improved Factory Repair (Boot) operation for Motorola devices, based on Qualcomm CPUs

  • Made improvements in Download Manager ("Download *.srf" button in Software) - from now on you can download files in separate window, so you can work with devices while selected files are being downloaded.

  • Box firmware has been updated to 1.22 version. In this firmware version we have improved connection for some eMMC device.
    To update firmware automatically it is necessary to connect the Box and only then run the software.
    Also, you can update Box firmware manually via “Update Box Firmware” button in “Welcome” tab of Octoplus JTAG PRO software.

  • Uploaded SRFs for Samsung SM-G318H and ZTE L5 Plus into the Support Area (“USER UPLOADED SRF” folder) (thanks to Mr. help-mi)

  • Uploaded new “Live logs” into the Support Area

  • All pinouts and Repair procedures are described in the manual ("Help" button in the software)


You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#36
Octoplus JTAG PRO v.1.4.5 - many new phones added!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO v.1.4.5 is out! New models added!

Added support for LG LS450, LG LS675, LG V520, Samsung SM-J100VPP, Samsung SM-J120A, Samsung SM-J3110, Samsung SM-G386W, Samsung SM-P605, Samsung GT-N7105, HTC One SV C520e (PL80130) and Prestigio PSP 3504 DUO via eMMC.

Uploaded new “Live logs” into the Support Area.

Octoplus JTAG PRO Software v.1.4.5 Release Notes:
Added support for the following models via eMMC:

  • LG LS450 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG LS675 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • LG V520 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G386W – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J100VPP – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J120A – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J3110 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung GT-N7105 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-P605 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC One SV C520e (PL80130) – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Prestigio PSP 3504 DUO – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)
Uploaded new “Live logs” into the Support Area
Improved operation logging
Uploaded new eMMC (ISP) pinout picture for another PCB revision of SM-j320F into the Support Area (thanks to Mr. rebainoor)
All pinouts and Repair procedures are described in the manual ("Help" button in the software)
You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#37
Octoplus JTAG PRO v.1.4.6 - massive update!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO v.1.4.6 is out! New models, USB loaders and features added!

Added support for Samsung SM-J111M, Samsung SM-J320M, Samsung SM-G361H, Samsung SM-G531H/DS, Samsung GT-I9295, Samsung SM-N900J, Samsung SM-T567V, HTC Desire 616, Sony E6553 via eMMC and support for LG H440N and Huawei Y625-U32 via USB!

Added General Qualcomm USB loaders for MSM8x26, MSM8929, MSM8940, MSM8953, MSM8992

Added more than 35 unique Qualcomm USB loaders for different vendors' devices

Added possibility to select external Qualcomm USB loader!

Improvements in Content Extractor - added possibility of manual scanning (parsing) data from file or from connected via eMMC device

Uploaded new “Live logs” into the Support Area.

Octoplus JTAG PRO Software v.1.4.6 Release Notes:
Added support for the following models via eMMC:

  • Samsung SM-J111M – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-J320M – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. JSOUZA)*
  • Samsung SM-G361H – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G531H/DS – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. HELP-MI)*
  • Samsung GT-I9295 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-N900J – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-T567V – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • HTC Desire 616 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Sony E6553 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. TREJO1998)*
Added support for the following models via USB:

  • LG H440N – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. CYKADA)*
  • Huawei Y625-U32 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. REBAINOOR)*
* SFR files created by users are uploaded into “USER UPLOADED SRF” folder of the Support Area
Added General Qualcomm USB loaders for MSM8x26, MSM8929, MSM8940, MSM8953, MSM8992. Read/Write/Full Erase operations are supported
Added more than 35 unique Qualcomm USB Loaders for different vendors' devices (Read/Write/Full erase operations are supported):

  • Xiaomi – added loaders for MSM8916, MSM8917, MSM8936, MSM8937, MSM8953, MSM8976, MSM8992, MSM8996
  • Vivo – added loaders for MSM8917, MSM8937, MSM8953, MSM8976, MSM8996
  • Nokia – added loaders for MSM8937 and MSM8998
  • Oppo – added loader for MSM8937
  • ZTE – added loader for MSM8996
Added possibility to select external Qualcomm USB loader! From now on you can select external Qualcomm USB loader ("*.mbn», "*.bin", "*.elf") to connect the device via USB. This feature will be useful, if built-in USB loaders are not compatible with your device, or necessary loader is not included in the Software.

To select external USB loader, do the following: select "USB" option in Software, select "Brand: Custom Settings", select "Device (Core): Custom Loader" and press “Connect” button to select loader and connect the device. Don't forget to put the device into "Qualcomm...9008" mode before.
Improvements in "Content Extractor":

  • Added possibility of manual scanning (parsing) data from file or from connected via eMMC device. From now on you can select method that will be used for parsing folders and data – “Full Scan” or “Manual Scan”. “Full Scan” will parse all folders and data and may take 0-1-2 hours. If you don’t need to scan (parse) all data and wait long time, you can use "Manual Scan" method, which allows you to select a folder to parse and scanning process takes only few seconds. Just press "Read from file…” or “Read from device” button and select method for data scanning (parsing).
Uploaded new “Live logs” into the Support Area
All pinouts and Repair procedures are described in the manual ("Help" button in the software)
You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#38
Octoplus JTAG PRO v.1.4.7 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO v.1.4.7 is out! New models added!

Added support for Samsung SM-J710FN, Samsung SM-G600FY, Samsung SM-P555, Samsung GT-P3100, Samsung SM-T211, Samsung SM-T285, Samsung SM-T285YD, Samsung SM-T331, Samsung SM-T377P, Samsung SM-T535, Samsung SM-T555, Lenovo P700i via eMMC and support for Huawei Y560-l01 via USB.

Some adjustments and improvements were made.

Uploaded new “Live logs” into the Support Area.

Octoplus JTAG PRO Software v.1.4.7 Release Notes:
Added support for the following models via eMMC:

  • Samsung SM-J710FN – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G600FY – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-P555 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung GT-P3100 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-T211 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-T285 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-T285YD – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-T331 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-T377P – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-T535 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-T555 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Lenovo P700i – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. help-mi)*
Added support for the following models via USB:

  • Huawei Y560-l01 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files (thanks to Mr. rebainoor)*
* SFR files created by users are uploaded into “USER UPLOADED SRF” folder of the Support Area
Added operations progress bar (for main window operations) on PC task bar
Improved writing of system partition/data in Samsung Factory Repair operation (thanks to Mr. andrei_d1978)
Improvements in Download Manager - added possibility to select and download all files from the Support Area
Improved Reset FRP operation for connected via eMMC Qualcomm CPUs-based devices
Fixed issue of check boxes blinking in interface selection
Fixed issue of Software hangup/crashing after write error arising in Smart/Factory Repair operation
Uploaded new “Live logs” into the Support Area
All pinouts and Repair procedures are described in the manual ("Help" button in the software)
You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#39
Octoplus JTAG PRO v.1.4.8 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO v.1.4.8 is out! New models added!

Added support for Samsung SM-J320A, Samsung SM-G750A, Samsung SCH-I605, Samsung SGH-I317, Samsung SHV-E270S via eMMC and support for Alcatel OT-4060A, Alcatel OT-5054O and Alcatel OT-6055U via USB.

Many improvements and new possibilities.

Uploaded new “Live logs” into the Support Area.

Octoplus JTAG PRO Software v.1.4.8 Release Notes:
Added support for the following models via eMMC:

  • Samsung SM-J320A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G750A - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SCH-I605 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SGH-I317 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SHV-E270S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Added support for the following models via USB:

  • Alcatel OT-4060A - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Alcatel OT-5054O - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Alcatel OT-6055U - Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files

Added possibility to select any SRF manually after device connecting (from now on “Smart repair” button is always active after successful device connecting).


Added new USB loaders for Qualcomm MSM8952 CPU for Alcatel devices.


Improvements on “Boot operation mode” tab:

  • During “Boot operation mode” installation next to “Partition config” and “Boot bus config” register drop-down lists you may now see the final value of these registers (in Hex and Bin formats).
  • Added operation with H/W reset function [RST_N_FUNCTION] register.

Improvements when outputting information to Software log:

  • Added showing of sizes (capacities) of partitions when connecting eMMC.
  • Added possibility of showing the partition table (start address, length) in Hex values. To do this, it is necessary to select option “Partition info in Hex address” at “Welcome” tab of Software.
  • Added possibility of clearing Software log by pressing right mouse button.

Improved “Factory Repair” operation and searching of “Build info” for Samsung devices, based on TI OMAP 4430 CPU (thanks to andrei_d1978).


Improvements in Download Manager - added possibility to select and download group of files (select files by vendor) from the Support Area.


Uploaded new SFR for Huawei Y530-U00 into the Support Area.


Uploaded new “Live logs” into the Support Area.


All pinouts and Repair procedures are described in the manual ("Help" button in the software).

You do not have permission to view link Đăng nhập hoặc Đăng ký.


 

namnhatrang

Moderator
Thành viên BQT
#40
Octoplus JTAG PRO v.1.4.9 is out!

[HR][/HR]

You do not have permission to view link Đăng nhập hoặc Đăng ký.
Octoplus JTAG PRO v.1.4.9 is out! New models and features added!

Added support for LG LS740 and Samsung SM-G800F via eMMC and support for Alcatel OT-5051D, Alcatel OT-5051X, Alcatel OT-5056E, Alcatel OT-6044D, Lenovo K33a48, Lenovo P1a42, Lenovo P2c72, Lenovo ZUK Z2 Z2131 and ZTE N939Sc via USB.

Changes and improvements in Partition Manager were made.

New Qualcomm USB loaders added.

Uploaded new “Live logs” into the Support Area.

Some adjustments and improvements were made.

Octoplus JTAG PRO Software v.1.4.9 Release Notes:
Added support for the following models via eMMC:

  • LG LS740 – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Samsung SM-G800F – Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added support for the following models via USB:

  • Alcatel OT-5051D – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Alcatel OT-5051X – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Alcatel OT-5056E – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Alcatel OT-6044D – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Lenovo K33a48 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Lenovo P1a42 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Lenovo P2c72 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • Lenovo ZUK Z2 Z2131 – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
  • ZTE N939Sc – Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
Added new Qualcomm USB loaders for the next devices (Read/Write/Full erase operations are supported):

  • Huawei - for MSM8936 and MSM8952
  • ZTE - for MSM8936, MSM8952, MSM8953, MSM8976, MSM8994 and MSM8996
Improved procedures of sending USB loaders and connecting
Changes and improvements in Partition Manager

  • "Open File" button allows you to open full flash file, red from phone (img file), select required partitions and write them to the phone, or select any file instead of partition in table, which will be written accordingly to partitions table; also you can select a file which contains only partitions table and then select files corresponding to each partition in table. If eMMC chip is not connected - read/write operations are not available
  • "Connect" button from now on connects target device, but doesn't read partitions table. It will change its state to "Read from device", what allows you to perform partitions search, parsing and further operations in designated window, if eMMC chip is connected properly
  • While eMMC chip is connected, "Save partitions" reads data from memory, "Write partitions" writes present partitions accordingly from image or files opened
  • You have to reconnect target device after each write operation to see the changes. "Disconnect" button added for this purpose
  • "Hex editor" allows to change data directly in memory or file opened, accordingly to selected target
Some log changes were made.
Uploaded new “Live logs” into the Support Area.
All pinouts and Repair procedures are described in the manual ("Help" button in the software).
You do not have permission to view link Đăng nhập hoặc Đăng ký.